3Com OfficeConnect WX1200, Справочное руководство

Страница: 95 / 520

Importing or Drawing Floor Details 95
Drawing Floor
Objects Manually
You can use the Free Draw palette to add objects to your floor drawing
that are not related to RF obstacles (for example, a conference room
table).
The tools for drawing non-RF objects work the same as the tools for
drawing RF objects, but the tools are different. To draw a non-RF object,
use the tools in the Free Draw group box. To draw RF objects, use the
tools in the RF Obstacle group box. (See“Drawing RF Obstacles” on
page 99.)
To draw an object
1 Display the floor plan in the Content panel.
2 In the Task List panel, click Tools.
3 In the Free Draw area under Layout, click one of the icons and draw the
object as described in the following table.
Object Action
(circle)
Diagonally drag the cursor over the area where you
want the circle to appear.
(square)
Diagonally drag the cursor over the area where you
want the square to appear.
(parallelogram)
1 Click at a vertex, and drag the cursor to the next
vertex.
2 Click again, and drag the cursor until the
parallelogram takes the shape you want.
3 Click to finish.
(polygon)
1 Click at a vertex, then move the cursor to the next
vertex.
2 Repeat until the polygon takes the shape you want.
For a polygon with n sides, click n-1 additional times
at the vertices. For example, to draw a 7-sided
polygon, click at 6 vertices.
3 At the last vertex before completing the shape,
Right-click to complete the polygon.