3Com OfficeConnect WX1200, Справочное руководство

Страница: 79 / 520

Creating or Modifying Floors 79
Creating or
Modifying Floors
To create or modify a floor in a building:
1 Select the RF Planning tool bar option.
2 In the Organizer panel, click the building name.
3 Do one of the following:
„
If you are creating a new floor, click on the building name in the
Organizer panel and select Create Floor in the Task List panel. A
series of dialog boxes prompts you for information about the new
floor.
„
If you are modifying an existing floor, select the floor name in the
Content panel for the building, then click
Properties . A dialog box
allows you to edit the floor’s properties.
„
Click on the floor name in the Organizer panel, click on Floor in the
Task List panel, and then select Floor properties under Edit Floor.
The following figure illustrates the information displayed in the Floor
Properties dialog box for a floor. Note that this information is the same as
the information for which you are prompted when you create a floor.
4 To change the floor name, type the new name in the Floor Name box
(1 to 60 alphanumeric characters, with no tabs). Each floor name in a
building must be unique.
5 To change the default attenuation for radios, type the number of dB in
the 802.11a (dB) box or 802.11b/g (dB) box.