3Com OfficeConnect WX1200, Справочное руководство

Страница: 201 / 520

Viewing and Setting Log and Trace Settings 201
„
Critical —You must resolve the critical condition. If you do not resolve
the condition, the WX can reboot or shut down.
„
Error —The WX is missing data or unable to form a connection.
„
Warning —A possible problem exists.
„
Notice —Events that can cause system problems have occurred. These
are logged for diagnostic purposes.
„
Info —Informational messages only. No problems exist.
„
Debug —Output from debugging.
The default severity level is Error.
The debug level produces a lot of messages, many of which can appear
to be somewhat cryptic. Debug messages are used primarily by 3Com for
troubleshooting and are not intended for administrator use.
3 Configure logging to the console:
a To specify that logging messages be sent to the console, select Enabled .
Clear Enabled to disable the logging of messages to the console.
b In the Severity Filter list, select the lowest level of severity of the event
or condition to be logged (see the list in step 2).
The default severity level is Error.
4 Configure logging to the current login session:
a To specify that logging messages be sent to the current login session,
select
Enabled . Clear Enabled to disable the logging of messages
sent to the current login session.
b In the Severity Filter list, select the lowest level of severity of the event
or condition to be logged (see the list in step 2).
The default severity level is Info.
5 Configure trace logging:
a To enable trace logging, select Enabled . Clear Enabled to disable
trace logging.
b In the Severity Filter list, select the lowest level of severity of the event
or condition to be logged (see the list in step 2).
The default severity level is Debug.
c In the Maximum Size box, specify the maximum size for the trace log
(1 to 50 MB). The default is 1 MB.
6 To create an external log server, go to “Creating an External Log Server”.
Otherwise, click
Save .