Installing and Configuring the NetWare Server Driver
97
9 Select
Yes
at the prompt to confirm the name of the
driver to copy.
The installation program copies the driver to the appropriate
server subdirectory. The Configuration screen appears.
Specifying the Slot Number
You need not specify the slot number if you are installing
only one NIC.
1 In the Configuration screen, select
Slot Number
.
2 Enter the slot number of the NIC that you want to
install. For example:
10001
See Changing NetWare Driver Configuration Parameters on
page 103 for instructions on changing other parameters in
this screen.
Loading the Driver
1 Select
Save parameters and load driver
.
The installation program loads the configured driver and
then writes the appropriate LOAD and BIND commands to
the AUTOEXEC.NCF file.
The system assigns a network number.
2 Enter a network number, or press Enter to select the
system-assigned number.
If no errors are encountered, the installation program asks
whether you want to select an additional network driver.
3 Select
Yes
to set up another NIC.
Setting Up Another NIC
1 Follow the prompts for another NIC:
■
Select the driver
■
Enter the slot number
■
Save parameters and load the driver
2 Repeat the process for all NICs to be set up.
3 After all NICs are set up, press Esc several times to
return to the Installation Options screen.
