68
C
HAPTER
4: I
NSTALLING
D
YNAMIC
A
CCESS
S
OFTWARE
IN
W
INDOWS
■
In the next window, configure the IP address and
subnet mask.
Windows NT
—Restart the computer when the software
prompts you to do so.
Specifying Traffic Priorities
You can use the Dynamic
Access
Software Setup window to
specify traffic priorities.
1 Double-click the 3Com Dynamic
Access
icon in the
Windows Control Panel.
The Dynamic
Access
Software Setup window appears.
2 Click the appropriate tab:
■
Traffic Prioritization
—Prioritize applications to
ease bottlenecks in the network and allow critical
applications to take network precedence. You can
turn traffic prioritization on or off independently for:
– Each NIC that is not in a group and does not
have VLANs
– Each group that does not have VLANs
– Each VLAN
– Each virtual NIC (NIC, group, or VLAN) shown in
the Traffic Prioritization control panel
■
Administration
—Set Dynamic
Access
control panel
access, set VLAN options, enable efficient multicast
control, and enable the prioritizing of multicast
traffic.
Saving the Configuration
To save and exit, click
OK
.
A prompt asks whether you want to configure traffic
prioritization. If you click
Yes
, the Dynamic
Access
Software
Setup window appears.
To exit without saving the configuration, click
Cancel
.
For detailed information on
Dynamic
Access software,
go to:
http://www.3com.com/dynamicaccess
