Installing and Configuring the NetWare Server Driver
95
■
Select the board. For example, enter:
3c99x_1
, and
then press Enter.
16 When prompted, enter the network number, and
then press Enter.
17 In the Frame Type field, press Enter to display a list of
frames, choose a frame, and press Enter.
18 Press Esc.
You are prompted to save the changes.
19 Press Enter to save the changes.
The configured Protocol to Network Interface Bindings
screen appears.
20 Press Esc to Exit.
The main menu appears.
■
NetWare 4.11: Restart the server.
■
NetWare 5.0:
■
Select
Reinitialize System
.
■
Press Enter to reinitialize.
Press Esc to exit from the program.
Installing the Server Driver and DynamicAccess Technology
Using AUTOEXEC.NCF
You can also install the server driver by editing (or adding
new) LOAD commands in the AUTOEXEC.NCF file.
With NetWare installed and the server up and running,
complete the following steps to install and configure the
driver and Dynamic
Access
technology server features on a
NetWare file server.
In NetWare screens, use the arrow keys to select an item
and then press Enter.
