Installing and Configuring the NetWare Server Driver
99
Verifying the PCI Slot Number
To verify the PCI slot number in which a NIC is installed:
1 Boot the NetWare server with the -na option.
This prevents the AUTOEXEC.NCF file from loading. For
example, enter:
server -na
2 Issue the load command for the NIC LAN driver
without a slot parameter.
For example, enter:
load sys:\system\3C99X.lan
3 NetWare lists the valid slot number(s) for the NIC,
depending on how many NICs are installed. The
values appearing in the list are the slot values that
you should use.
Example:
After you issue the command, a message appears. At the
end of the message, additional text similar to the following
appears:
Total of 2 3C99x PCI adapter card(s) found.
Supported slot values are 2,3.
Slot:2
Installing Server Features
Two drivers are associated with Dynamic
Access
technology
server features under NetWare: SE and LBRSL.
1 From the Configuration Options screen select
Product options
.
2 Select
Install a product not listed
.
The following message appears:
Product will be installed from A:\. If you are
installing from floppy, insert the first
diskette of the product you want to install
into the drive and verify that the path above
is correct.
Press <F3> to specify a different path;
Press <ENTER> to continue.
3 Press F3.
