3Com CoreBuilder 7000, Руководство по управлению

Страница: 155 / 516

ILMI ATM Addresses 155
Display De-registered
ATM Addresses at
Port
Displays IME or static ATM addresses at the specified port that were
de-registered by LMA or IME but whose connections are still active. These
addresses have not yet been erased from the address table associated
with the port.
Command Actions
Command Result
Table 21 describes the IME parameters displayed by the command.
Example
Enter:
3 1 3 0.0
The following information is displayed:
Enter the menu sequence:
(3) CON: Connections
(1) ADD: ATM addresses
(3) ACT: Not active addresses
Enter a parameter at the prompt
Parameter Format or Range
Port ID slot.port ( 0.0 for all ports)
Direct access sequence:
3 1 3
[parameters]
System action taken: The de-registered IME or static ATM addresses for the
specified port are displayed.
System message display: Information is displayed as shown in the example
below.
Port ATM address: Network prefix ATM address: user_part Member
id id
------- --------------------------------------- ---------------------------
<3.1> 47. 0. 0. 0. 0. 0.3c. 0. 0.b*. *. *. * *. *. *. *. *. *. * 3101
<3.2> 47. 0. 0. 0. 0. 0.3c. 0. 0.c*. *. *. * *. *. *. *. *. *. * 3201