3Com 3C10402B, Руководство администратора

Страница: 470 / 582

470 A
PPENDIX
D: C
ONNE
X
TIONS
H.323 G
ATEWAY
If you choose to use alternate gatekeepers and have also selected to
autodiscover new gatekeepers if ConneXtions cannot contact the
preferred gatekeeper, ConneXtions first tries to use alternate gatekeepers
from the list (in priority order); if this fails, it then tries to autodiscover a
new gatekeeper.
16 Do you want to route calls through the Gatekeeper? You can route H.323
calls through the gatekeeper for these reasons:
■
To control calls more effectively. For example, service providers need to
be able to control call flow to allow them to bill for calls placed
through the network.
■
To reroute a call to another endpoint if a called endpoint is
unavailable.
■
To maintain interoperability with multi-vendor equipment which
routes all calls directly using the gatekeeper.
■
To use address resolution in large multi-zone configurations which
have one or more gatekeepers in each zone.
17 You are prompted to set the size of the log files. The default value is 1
Mb. ConneXtions maintains two log files, named
ConneXtions01.log
and
ConneXtions02.log
. Data is logged to only one of these at a time.
Once the active log file reaches a specified size, data logging switches to
the second log file. Any data previously stored in that log file is
overwritten.
18 Setup Complete: Click Finish.
Finishing the
Installation
Verify the installation:
1 Log on to NetSet using the administrator login ID and password.
2 Click PSTN Gateway Configuration > Line Cards .
3 Note the MAC Address, extension, status, and group for each port.
4 Record the extension numbers for each H.323 port.
5 Enter user-friendly port names that appear when a user dials an H.323
port.
6 Close the browser to exit NetSet and end the installation.