3Com 3C10402B, Руководство администратора

Страница: 255 / 582

Adding Telephone Users and Devices 255
7 When you apply these settings, the telephone typically reboots. It then
registers itself with the system and is a member of the Telephones list
(click T
elephone Configuration > Telephones) . You will have a dialtone
and be ready to make and receive calls.
Adding a 3Com 3108
Wireless Telephone
A SIP-mode system supports the 3Com 3108 Wireless Telephone, which
uses standard SIP.
The process to add a 3108 Wireless Telephone is similar to adding a
generic SIP telephone with the extra step of establishing connectivity
between the 3108 and your wireless network.
Follow these steps to add a 3108 Wireless Telephone to your SIP mode
system:
1 Log in to the NBX NetSet utility using the administrator login ID and
password.
2 Click User Configuration > Users > Add.
Specify an unused extension number, a first name and last name of the
user, and select
Default 3108 Wireless Group
as the Telephone Group.
3 Click OK to save the new user profile.
4 Configure connectivity settings on the telephone.
The 3108 Wireless Telephone Guide (click Downloads > Documentation >
Telephone Guides) includes complete instructions about how to configure
the telephone to connect to a wireless network and to the system.
After you configure the settings on the telephone:
■
The telephone sends a registration request that contains the user
extension and password information to the system.
■
The system validates the telephone user.
If the data is valid, the system registers the telephone with the IP
address information in the registration request. After a successful
registration, the new telephone is a member of the Telephones list
(click T
elephone Configuration > Telephones) .
Auth ID Use this format: sip:ext@NBX IP address
For example: sip:1022@192.168.123.21