P-871H Series User’s Guide
64
Chapter 11 Command Examples
This command sets the administrator login password (up to 32 printable ASCII characters).
The following example sets the login password to 54321.
Figure 34
sys password Command Example
11.5 sys sw bmstorm enable
Syntax:
sys sw bmstorm enable <threshold(0|1|2|3)>
This command enables broadcast storm control on the Prestige with the specified threshold.
The following example enables broadcast storm control with threshold 1 (which limits the
broadcast storm packets to 15000 pps (packet per second) for a 100Mbps port or 1500 pps for
a 10Mbps port).
Figure 35
sys sw bmstorm enable Command Example
11.6 sys sw mac list
Syntax:
sys sw mac list
This command displays the MAC address table. The following figure shows an example.
Figure 36
sys sw mac list Command Example
11.7 Ethernet Port Setup
These are the commonly used
sys sw
commands you use to configure the Ethernet ports on
the Prestige.
ras> sys password 54321
ras> sys sw bmstorm enable 1
The rising threshold is around 15000(pps) in 100Base and 1500(pps) in 10Base.
ras>
ras> sys sw mac list
Index Port VID Mac Address Type
----- ---- ---- ----------------- -------
1 4 1 00:85:a0:01:01:04 Dynamic
ras>
Summary of Contents for P-871H Series
