ZyXEL Communications P-871H Series, User Manual

Page: 62 / 101

P-871H Series User’s Guide
Chapter 10 Introduction to CLI 61
10.3 Command Summary
The following tables are summaries of the commands available in the Prestige together with a
brief description of each command. See the related section in this User’s Guide for more
background information.
Table 22 Command Summary
COMMAND DESCRIPTION
config save
Saves current configuration.
exit
Ends the console or telnet session.
ip igmpsnoop enable
Activates IGMP snooping on the Prestige.
disable
Deactivates IGMP snooping on the Prestige.
unknow-
multicast
<drop|
forward>
Specifies the action to perform when the Prestige receives an
unknown multicast frame.
Enter
Drop to discard the frame(s). Enter Forward to send the
frame(s) to the destination device.
sys password
<password>
Sets the system administrator password. The default is 1234.
romreset
Resets the device back to the factory defaults.
sys sw
bmstorm
These commands relate to broadcast storm control.
disable
Clears current run-time settings.
display
Displays broadcast storm control settings.
enable
<threshold>
Specifies the packet threshold and direction (ingress/egress)
on the specified port.
mac ageSet <timeout>
Sets aging timeout.
ageView
Displays the aging timeout period.
list
Displays the MAC address table.
port enable <port>
Enables a specified port.
disable <port>
Disables a specified port.
speed <port>
<auto | 10H
|10F | 100H |
100F>
Sets the port speed and duplex mode.
flowctrl<port>
<0 | 1>
Enables or displays flow control on a port.
0: Disable
1: Enable
status
Displays Ethernet port settings.
qos defpri <port>
[<0..7>]
Sets the default ingress User Priority for a port.
map <0..7>
[<queue>]
Maps a User Priority to a Traffic Class.