P-871H Series User’s Guide
48
Chapter 6 VLAN
6.3.3 Configure VLAN Port Settings
To configure the VLAN settings on a port, click the
VLAN Port Setting
link in the
VLAN
Status
screen.
Figure 20
VLAN: VLAN Port Setting
The following table describes the labels in this screen.
6.4 Port-based VLAN Setup
Port-based VLANs are VLANs where the packet forwarding decision is based on the
destination MAC address and its associated port.
Port-based VLANs require allowed outgoing ports to be defined for each port. Therefore, if
you wish to allow two subscriber ports to talk to each other, for example, between conference
rooms in a hotel, you must define the egress (an egress port is an outgoing port, that is, a port
through which a data packet leaves) for both ports.
VID
This field displays the ID number of the VLAN group. Click the number to edit the
VLAN settings.
Active
This field indicates whether the VLAN settings are enabled (
Yes
) or disabled (
No
).
Name
This field displays the descriptive name for this VLAN group.
Delete
Click
Delete
to remove the selected entry from the summary table.
Cancel
Click
Cancel
to clear the
Delete
check boxes.
Table 16
VLAN: Static VLAN (continued)
LABEL
DESCRIPTION
Table 17
VLAN: VLAN Port Setting
LABEL
DESCRIPTION
Port
This field displays the Ethernet port number or the VDSL port (
VDSL
).
PVID
Enter a number between 1and 4094 as the port VLAN ID.
Apply
Click
Apply
to save the changes
Cancel Click
Cancel
to start configuring the screen again.
Summary of Contents for P-871H Series
