P-871H Series User’s Guide
Chapter 3 The Web Configurator
27
4
Assigning minimum bandwidth to the CPU port. If you limit bandwidth to the CPU port,
you may find that the Prestige performs sluggishly or not at all.
Note:
Be careful not to lock yourself and others out of the Prestige.
3.5 Resetting the Prestige
If you lock yourself (and others) from the Prestige or forget the Prestige password, you will
need to reload the factory-default configuration file to reset the Prestige back to the factory
defaults.
3.5.1 Reload the Configuration File
Uploading the factory-default configuration file replaces the current configuration file with the
factory-default configuration file. This means that you will lose all previous configurations
and the speed of the console port will be reset to the default of 9600bps with 8 data bit, no
parity, one stop bit and flow control set to none. The password will also be reset to “1234” and
the IP address to 192.168.1.1.
To upload the configuration file, do the following:
1
Connect to the console port using a computer with terminal emulation software. See
for details.
2
Disconnect and reconnect the Prestige’s power to begin a session. When you reconnect
the Prestige’s power, you will see the initial screen.
3
When you see the message “
Press any key to enter Debug Mode within 3
seconds ...
” press any key to enter debug mode.
4
Type
atlc
after the “
Enter Debug Mode
” message.
5
Wait for the “
Starting XMODEM upload
” message before activating XMODEM
upload on your terminal.
6
After a configuration file upload, type
atgo
to restart the Prestige.
Summary of Contents for P-871H Series
