ZyXEL Communications P-871H Series, User Manual

Page: 21 / 101

P-871H Series User’s Guide
20 Chapter 2 Hardware Overview
2.3 Rear Panel
The following figure shows the read panel of the Prestige.
Figure 3 Rear Panel
2.3.1 VDSL Port
Connect the Prestige directly to the wall jack using a telephone wire (RJ-11 connector).
2.3.2 PHONE Port
Connect a telephone to this port using a telephone wire (RJ-11 connector).
2.3.3 LAN Ports
The Prestige has four 10/100Mbps auto-negotiating, auto-crossover Ethernet ports. The LAN
interface is auto-crossover, so you may use a crossover cable or a straight-through Ethernet
cable to connect your Prestige to a computer/external hub.
2.3.4 Console Port
You can configure the Prestige via a terminal emulator software on a computer that is
connected to the Prestige through the console port. Connect the one end of the console cable to
the console port of the Prestige and the other end to a serial port (COM1, COM2 or other
COM port) of your computer.
VDSL Green On The Prestige is connected to a DSL line.
Slow
Blinking
The Prestige is initializing the DSL line.
Fast
Blinking
Data is being transmitted or received.
Off The DSL link is down.
Table 1 Front Panel LEDs (continued)
LED COLOR STATUS DESCRIPTION