ZyXEL Communications P-871H Series, User Manual

Page: 63 / 101

P-871H Series User’s Guide
62 Chapter 10 Introduction to CLI
vlan clear
<incoming
port>
<outgoing
port>
Clears port-based VLAN.
set <incoming
port>
<outgoing
port>
Sets port-based VLAN
status
Displays VLAN status.
type <802.1q |
port-based>
Sets VLAN mode.
vlan1q
All “sys sw vlan1q” commands relate to IEEE 802.1Q Tagged
VLAN configuration. Use “config save” to save your
configuration changes.
port status
<port>
Shows a port’s VLAN information.
port
defaultVID
<port><vid>
Sets the default VLAN ID of a port.
svlan cpu
<vlan id>
Sets the VLAN ID of the management VLAN (CPU).
svlan delentry
<vid>
Deletes the specified (VID) static VLAN.
svlan list
Displays a table of static VLANs.
svlan setentry
<vid> <port>
Applies a static VLAN to a port.
vlan list
<all|vid|start
_vid end_vid>
Shows the specified IEEE 802.1Q Tagged VLAN table.
status
Displays general VLAN status.
vdsl port clrcntr
Clears port counter.
counter
Displays VDSL counter.
snr
Displays SNR margin.
speed
Displays VDSL rate.
status
Displays DSL state machine.
ptmf config
Displays PTMF configuration.
counter
Displays PTMF counter.
clrcntr
Clears PTMF counters.
version
Displays modem code version.
Table 22 Command Summary (continued)
COMMAND DESCRIPTION