ZyXEL Communications P-871H Series, User Manual

Page: 57 / 101

P-871H Series User’s Guide
56 Chapter 8 Maintenance
4 Enter your password as requested (the default is “1234”).
5 Enter
bin
to set transfer mode to binary.
6 Use
put
to transfer files from the computer to the Prestige, for example,
put
firmware.bin ras
transfers the firmware on your computer (firmware.bin) to the
Prestige and renames it to “ras”. Similarly,
put config.cfg config
transfers the
configuration file on your computer (config.cfg) to the Prestige and renames it to
“config”. Likewise
get config config.cfg
transfers the configuration file on the
Prestige to your computer and renames it to “config.cfg”. See Table 20 on page 55 for
more information on filename conventions.
7 Enter
quit
to exit the ftp prompt.
8.2.3 GUI-based FTP Clients
The following table describes some of the commands that you may see in GUI-based FTP
clients.
General Commands for GUI-based FTP Clients
COMMAND DESCRIPTION
Host Address Enter the address of the host server.
Login Type Anonymous.
This is when a user I.D. and password is automatically supplied to the server
for anonymous access. Anonymous logins will work only if your ISP or service
administrator has enabled this option.
Normal.
The server requires a unique User ID and Password to login.
Transfer Type Transfer files in either ASCII (plain text format) or in binary mode.
Configuration and firmware files should be transferred in binary mode.
Initial Remote Directory Specify the default remote directory (path).
Initial Local Directory Specify the default local directory (path).