ZyXEL Communications P-870HW-I Series, User Manual

Page: 263 / 438

P-870HW-I1 User’s Guide
Chapter 24 LAN Setup 263
24.4 Wireless LAN Setup
Use this menu to configure basic wireless settings and wireless security. See Chapter 6 on
page 93 for background information. To open this menu, enter 5 in menu 3.
Outgoing protocol
filters
Enter up to four filter sets. If you enter more than one, separate each one with a
comma ( , ).
IP Alias 2 Select this to add the specified subnet to the LAN port.
IP Address Enter the IP address of the ZyXEL Device on the subnet.
IP Subnet Mask Enter the subnet mask of the subnet.
RIP Direction Use this field to control how much routing information the ZyXEL Device sends
and receives on the subnet.
None - The ZyXEL Device does not send or receive routing information on the
subnet.
Both - The ZyXEL Device sends and receives routing information on the
subnet.
In Only - The ZyXEL Device only receives routing information on the subnet.
Out Only - The ZyXEL Device only sends routing information on the subnet.
Version Select which version of RIP the ZyXEL Device uses when it sends or receives
information on the subnet.
RIP-1 - The ZyXEL Device uses RIPv1 to exchange routing information.
RIP-2B - The ZyXEL Device broadcasts RIPv2 to exchange routing
information.
RIP-2M - The ZyXEL Device multicasts RIPv2 to exchange routing information.
Incoming protocol
filters
Enter up to four filter sets. If you enter more than one, separate each one with a
comma ( , ).
Outgoing protocol
filters
Enter up to four filter sets. If you enter more than one, separate each one with a
comma ( , ).
Table 119 Menu 3.2.1: IP Alias Setup (continued)
FIELD DESCRIPTION