ZyXEL Communications P-870HW-I Series, User Manual, Page: 59 / 438

P-870HW-I1 User’s Guide
Chapter 3 Connection Wizard 59
3.5 Wireless Security Screens
The next screens depend on which type of Security you select in the previous screen.
3.5.1 Wireless Security: None
Use this screen to enable OTIST for your wireless network.
Figure 15 Connection Wizard: Wireless Security: None
The following table describes the labels in this screen.
3.5.2 Wireless Security: Basic Security Screen 1
Use this screen to set up the WEP key(s) for your wireless network.
Table 7 Connection Wizard: Wireless Security: None
LABEL DESCRIPTION
Do you want to
enable OTIST?
Select Yes if you want to set up OTIST security. If you set up OTIST, your wireless
network uses WPA-PSK security, not the security you selected and set up in the
previous screen(s). See Section 6.5 on page 108 for more information about setting
up OTIST.
Setup Key Type a key (password) 8 ASCII characters long.
Note: You must set up the same OTIST key on the wireless clients
too.
Back Click this to return to the previous screen.
Next Click this to save your changes on this screen and to proceed to the next screen.
Exit Click this to close the wizard without saving the changes on this screen.