ZyXEL Communications P-870HW-I Series User Manual Download Page 90

Page: 90 / 438

P-870HW-I1 User’s Guide

Chapter 5 Status Screen

The following table describes the fields in this screen.

5.1.4 Status: WLAN Station Status

Use this screen to view the wireless stations that are currently associated to the ZyXEL
Device. To access this screen, click

Status

, and then click

(Details...)

next to

WLAN Status

Figure 43

Status > WLAN Station Status

Table 31

Status > Packet Statistics

LABEL

DESCRIPTION

Packet Statistics

Port

This field displays the ZyXEL Device ports.

Status

This field displays the status of each ZyXEL Device port. The values are the

same ones shown in the

Status

screen.

TxPkts

This field displays the number of packets transmitted on this port.

RxPkts

This field displays the number of packets received on this port.

Collisions

This is the number of collisions on this port.

Errors

This field displays the number of error packets on this port.

Tx B/s

This field displays the number of bytes transmitted in the last second.

Rx B/s

This field displays the number of bytes received in the last second.

Up Time

This field displays the amount of time this port has been up.

System Up Time

This is the elapsed time the system has been up.

Poll Interval(s)
Set Interval

Type how many seconds the ZyXEL Device should wait before it automatically

refreshes this screen. Click

Set Interval

to apply the change.

Stop

Click this button to stop refreshing this screen.

Summary of Contents for P-870HW-I Series























































































































































































































































































































































































































































Search results

Summary of Contents for P-870HW-I Series

Reviews:

ZyXEL Communications P-870HW-I Series, User Manual, Page: 90 / 438

Search results

Summary of Contents for P-870HW-I Series

Reviews: