background image

P-870HW-I1 User’s Guide

Chapter 4 Bandwidth Management Wizard

83

Figure 37   

BWM Wizard: Priority Setup

The following table describes the labels in this screen.

4.6  Congratulations Screen

Use this screen to finish the 

Bandwidth Management Wizard

.

Table 27   

BWM Wizard: Priority Setup

LABEL

DESCRIPTION

Service

This field displays the applications you selected in the previous screen.

Priority

Select the priority of each application. Other applications have lower priority than all 

the applications in this screen, including ones to which you assign 

Low

 priority.

Back

Click this to return to the previous screen.

Apply

Click this to save your changes on this screen and to proceed to the next screen.

Exit

Click this

 

to close the wizard without saving the changes on this screen.

Summary of Contents for P-870HW-I Series























































































































































































































































































































































































































































Reviews: