ZyXEL Communications P-870HW-I Series, User Manual, Page: 191 / 438

P-870HW-I1 User’s Guide
Chapter 13 Certificates 191
13.14 Edit Directory Server Screen
Use this screen to create or edit a directory server the ZyXEL Device should use if the
certificate does not list a server or if the listed server is not available. To open this screen, click
Add or an Edit icon in Security > Certificates > Directory Servers .
Figure 108 Security > Certificates > Directory Servers > Edit
The following table describes the labels in this screen.
Table 84 Security > Certificates > Directory Servers > Edit
LABEL DESCRIPTION
Directory Service
Setting
Name Type up to 31 ASCII characters (spaces are not permitted) to identify this directory
server.
Access Protocol
a
Use the drop-down list box to select the access protocol used by the directory
server.
LDAP (Lightweight Directory Access Protocol) is a protocol over TCP that
specifies how clients access directories of certificates and lists of revoked
certificates.
Server Address Type the IP address (in dotted decimal notation) or the domain name of the
directory server.
Server Port This field displays the default server port number of the protocol that you select in
the Access Protocol field.
You may change the server port number if needed, however you must use the
same server port number that the directory server uses.
389 is the default server port number for LDAP.
Login Setting
Login The ZyXEL Device may need to authenticate itself in order to assess the directory
server. Type the login name (up to 31 ASCII characters) from the entity
maintaining the directory server (usually a certification authority).
Password Type the password (up to 31 ASCII characters) from the entity maintaining the
directory server (usually a certification authority).