manualshive.com logo in svg

ZyXEL Communications P-870HW-I Series, User Manual, Page: 132 / 438

Share
Download
ZyXEL Communications P-870HW-I Series User Manual Download Page 132

P-870HW-I1 User’s Guide

132

Chapter 8 LAN

The following table describes the fields in this screen.

Table 53   

Network > LAN > Advanced

LABEL

DESCRIPTION

RIP & Multicast 

Setup

RIP Direction

RIP (Routing Information Protocol) allows a router to exchange routing 

information with other routers. Use this field to control how much routing 

information the ZyXEL Device sends and receives on the subnet.

None

 - The ZyXEL Device does not send or receive routing information on the 

subnet.

Both

 - The ZyXEL Device sends and receives routing information on the subnet.

In Only

 - The ZyXEL Device only receives routing information on the subnet.

Out Only

 - The ZyXEL Device only sends routing information on the subnet.

RIP Version

Select which version of RIP the ZyXEL Device uses when it sends or receives 

information on the subnet.

RIP-1

 - The ZyXEL Device uses RIPv1 to exchange routing information.

RIP-2B

 - The ZyXEL Device broadcasts RIPv2 to exchange routing information.

RIP-2M

 - The ZyXEL Device multicasts RIPv2 to exchange routing information.

Multicast

You do not have to enable multicasting to use 

RIP-2M

. (See 

RIP Version

.)

Select which version of IGMP the ZyXEL Device uses to support multicasting on 

the LAN. Multicast packets are sent to a group of computers on the LAN and are 

an alternative to unicast packets (packets sent to one computer) and broadcast 

packets (packets sent to every computer).

None

 - The ZyXEL Device does not support multicasting.

IGMP-v1

 - The ZyXEL Device supports IGMP version 1.

IGMP-v2

 - The ZyXEL Device supports IGMP version 2.

Multicasting can improve overall network performance. However, it requires extra 

processing and generates more network traffic. In addition, other computers on 

the LAN have to support the same version of IGMP.

Windows 

Networking

Allow between LAN 

and WAN

Select this check box if you want the ZyXEL Device to send NetBIOS (Network 

Basic Input/Output System) packets between the LAN and WAN. You should 

also make sure that NetBIOS packets are not blocked in 

Security > Firewall > 

Rules

.

NetBIOS packets are TCP or UDP packets that enable a computer to connect to 

and communicate with computers on other networks. It may sometimes be 

necessary to allow NetBIOS packets to pass through the ZyXEL Device in order 

to allow computers on the LAN to find computers on the WAN and vice versa.
This is the same setting you can set in 

Network > WAN > Advanced

.

Apply

Click this to save your changes back to the ZyXEL Device.

Reset

Click this

 

to reload the previous configuration for this screen.

Summary of Contents for P-870HW-I Series























































































































































































































































































































































































































































Reviews:

No comments