ZyXEL Communications P-870HW-I Series User Manual Download

Page: 254 / 438

P-870HW-I1 User’s Guide

254

Chapter 22 General Setup

22.2 Configure Dynamic DNS

Use this menu to configure your dynamic DNS account settings. See

Chapter 18 on page 229

for background information. To open this menu, select

Yes

Edit Dynamic DNS

in menu 1.

Figure 156

Menu 1.1: Configure Dynamic DNS

The following table describes the labels in this menu.

First System DNS

Server
Second System DNS

Server
Third System DNS

Server

Press [SPACE BAR] to select

From ISP

User Defined

None

and press

[ENTER]. These fields are not available on all models.
Select

From ISP

if your ISP dynamically assigns DNS server information. (In

this case, the ISP assigns the WAN IP address too. See

Menu 4

.) The field to

the right is read-only, and it displays the IP address provided by your ISP.
Select

User-Defined

if you have the IP address of a DNS server. You might get

it from your ISP or from your network. Enter the IP address in the field below.
Select

None

if you do not want to use this DNS server. If you select

None

for

all of the DNS servers, you must use IP addresses to configure the ZyXEL

Device and to access the Internet.

IP Address

Enter the IP addresses of the DNS servers. This field is available when you

select

User-Defined

in the field above.

Edit Dynamic DNS

If you want to set up dynamic DNS, press [SPACE BAR] to select

Yes

and

press [ENTER]. Menu 1.1 appears.

Table 113

Menu 1: General Setup (continued)

FIELD

DESCRIPTION

Menu 1.1 - Configure Dynamic DNS

   Service Provider= WWW.DynDNS.ORG
   Active= No
   Username=
   Password= ********
   Edit Host= No

Table 114

Menu 1.1: Configure Dynamic DNS

FIELD

DESCRIPTION

Service Provider

Select the name of your Dynamic DNS service provider.

Active

Select

Yes

to use dynamic DNS.

Username

Type the user name for your Dynamic DNS account.

Password

Type the password for your Dynamic DNS account.

Edit Host

If you want to set up a domain name to use with your dynamic DNS account,

press [SPACE BAR] to select

Yes

and press [ENTER]. Menu 1.1.1 appears.

Summary of Contents for P-870HW-I Series























































































































































































































































































































































































































































Search results

Summary of Contents for P-870HW-I Series

Reviews:

Related manuals for P-870HW-I Series

Brands by name

Popular brands

ZyXEL Communications P-870HW-I Series, User Manual

Search results

Summary of Contents for P-870HW-I Series

Reviews:

Related manuals for P-870HW-I Series

Brands by name

Popular brands