ZyXEL Communications P-870HW-I Series, User Manual, Page: 280 / 438

P-870HW-I1 User’s Guide
280 Chapter 29 NAT Setup
Figure 174 Menu 15.1.1: Address Mapping Rules
The following table describes the labels in this menu.
Menu 15.1.1 - Address Mapping Rules
Set Name= ACL Default Set
Idx Local Start IP Local End IP Global Start IP Global End IP Type
--- --------------- --------------- --------------- --------------- --
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Action= None Select Rule= N/A
Table 132 Menu 15.1.1: Address Mapping Rules
FIELD DESCRIPTION
Set Name Enter a descriptive name for the NAT mapping rules.
Idx This is the rule index number.
Local Start IP
Local End IP This is the range of IP addresses on the LAN port.
Local Start IP is N/A for Server port mapping.
Local End IP is N/A for One-to-one and Server mapping types.
Global Start IP
Global End IP This is the corresponding range of IP addresses on the WAN port.
Global Start IP should be 0.0.0.0 if both of the following conditions are
satisfied.
•
Your ISP assigns the IP address of your WAN port.
• The rule is a Many-to-One or Server rule.
Global End IP is N/A for One-to-one , Many-to-One and Server mapping
types.