ZyXEL Communications P-2812HNU-51c User Manual Download Page 71

Page: 71 / 433

Chapter 3 Introducing the Web Configurator

P-2812HNU-51c User’s Guide

3.2.2 Main Window

The main window displays information and configuration fields. It is discussed in
the rest of this document.

Right after you log in, the Status screen is displayed. See

Chapter 4 on page 75

for more information about the Status screen.

Remote

MGMT

TR069

Use this screen to configure the P-2812HNU-51c to be managed
by an ACS (Auto Configuration Server).

TR064

Use this screen to enable management via TR-064 on the LAN.

SNMP

Use this screen to to configure your P-2812HNU-51c's settings for
Simple Network Management Protocol management.

ServiceControl Use this screen to configure which services/protocols can access

which P-2812HNU-51c interface.

IPAddress

Use this screen to configure from which IP address(es) users can
manage the P-2812HNU-51c.

UPnP

General

Use this screen to turn UPnP on or off.

Parental

Control

Time
Restriction

Use this screen to configure the days and times when the
restrictions are enforced.

URL Filter

Use this screen to prevent users of your netowrk from viewing
inappropriate web content.

Interface

Group

Use this screen to map a port to a PVC or bridge group.

Maintenance

System

General

Use this screen to configure your device’s name, domain name,
management inactivity timeout and password.

Time Setting

Use this screen to change your P-2812HNU-51c’s time and date.

Logs

View Log

Use this screen to view the logs for the level that you selected.

Log Settings

Use this screen to change your P-2812HNU-51c’s log settings.

Tools

Firmware

Use this screen to upload firmware to your device.

Configuration

Use this screen to backup and restore your device’s configuration
(settings) or reset the factory default settings.

Restart

This screen allows you to reboot the P-2812HNU-51c without
turning the power off.

Diagnostic

General

Use this screen to test the connections to other devices.

802.1ag

Use this screen to configure CFM (Connectivity Fault
Management) MD (maintenance domain) and MA (maintenance
association), perform connectivity tests and view test reports.

OAM Ping Test

These screen displays information to help you identify problems
with the DSL connection.

Table 6

Navigation Panel Summary

LINK

TAB

FUNCTION

Summary of Contents for P-2812HNU-51c


















































































































































































































































































































































































































































Search results

Summary of Contents for P-2812HNU-51c

Reviews:

Brands by name

Popular brands

ZyXEL Communications P-2812HNU-51c, User Manual

Search results

Summary of Contents for P-2812HNU-51c

Reviews:

Brands by name

Popular brands