manualshive.com logo in svg

ZyXEL Communications P-2812HNU-51c, User Manual

Share
Download
ZyXEL Communications P-2812HNU-51c User Manual Download Page 22

Chapter 1 Introducing the P-2812HNU-51c

P-2812HNU-51c User’s Guide

22

• Web Configurator. This is recommended for everyday management of the P-

2812HNU-51c using a (supported) web browser.

• SNMP. The device can be monitored by an SNMP manager. See the SNMP 

chapter in this User’s Guide.

• TR-069. This is an auto-configuration server used to remotely configure your 

device.

1.3  Good Habits for Managing the P-2812HNU-
51c

Do the following things regularly to make the P-2812HNU-51c more secure and to 
manage the P-2812HNU-51c more effectively.

• Change the password. Use a password that’s not easy to guess and that consists 

of different types of characters, such as numbers and letters.

• Write down the password and put it in a safe place.
• Back up the configuration (and make sure you know how to restore it). 

Restoring an earlier working configuration may be useful if the device becomes 

unstable or even crashes. If you forget your password, you will have to reset the 

P-2812HNU-51c to its factory default settings. If you backed up an earlier 

configuration file, you would not have to totally re-configure the P-2812HNU-

51c. You could simply restore your last configuration.

1.4  Applications for the P-2812HNU-51c 

Here are some example uses for which the P-2812HNU-51c is well suited.

1.4.1  Internet Access

Your P-2812HNU-51c provides shared Internet access by connecting the DSL port 
to the DSL or MODEM jack on a splitter or your telephone jack. If you prefer not 
to use a DSL line and you have another broadband modem or router (such as 
ADSL) available, you can push the DSL/WAN switch (on the rear panel) to the 
WAN side and connect the WAN port to the broadband modem or router. This 
way, you can access the Internet via an Ethernet connection and still use the QoS, 
Firewall and VoIP functions on the P-2812HNU-51c. You can have up to eight WAN 
services over one ADSL, VDSL or Ethernet WAN line. The P-2812HNU-51c cannot 
work in ADSL, VDSL and Ethernet WAN mode at the same time.

Summary of Contents for P-2812HNU-51c


















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands