manualshive.com logo in svg

ZyXEL Communications P-2812HNU-51c, User Manual

Share
Download
ZyXEL Communications P-2812HNU-51c User Manual Download Page 168

Chapter 8 Network Address Translation (NAT)

P-2812HNU-51c User’s Guide

168

8.5  The DMZ Host Screen

In addition to the servers for specified services, NAT supports a default server IP 
address. A default server receives packets from ports that are not specified in the 
NAT Port Forwarding Setup screen.

Figure 75   

NAT > DMZ Host 

The following table describes the fields in this screen. 

8.6  The ALG Screen 

Some NAT routers may include a SIP Application Layer Gateway (ALG). A SIP ALG 
allows SIP calls to pass through NAT by examining and translating IP addresses 
embedded in the data stream. The SIP ALG translates the P-2812HNU-51c’s 
private IP address inside the SIP data stream to a public IP address. You do not 
need to use STUN or an outbound proxy if you enable the SIP ALG.

Table 46   

NAT > DMZ Host

LABEL

DESCRIPTION

Default Server

Enter the IP address of the default server which receives packets from 
ports that are not specified in the NAT Port Forwarding screen. 

Note: If you do not assign a 

Default Server

, the P-2812HNU-51c 

discards all packets received for ports that are not specified 
in the 

NAT Port Forwarding

 screen.

Apply

Click Apply to save your changes back to the P-2812HNU-51c.

Summary of Contents for P-2812HNU-51c


















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands