manualshive.com logo in svg

ZyXEL Communications P-2812HNU-51c, User Manual

Share
Download
ZyXEL Communications P-2812HNU-51c User Manual Download Page 147

 Chapter 7 Wireless LAN

P-2812HNU-51c User’s Guide

147

7.10  Technical Reference

This section discusses wireless LANs in depth. For more information, see the 
appendix.

802.11 Mode

Select 802.11b Only to only allow IEEE 802.11b compliant WLAN 
devices to associate with the P-2812HNU-51c. 

Select 802.11g Only to allow IEEE 802.11g compliant WLAN devices to 
associate with the P-2812HNU-51c. IEEE 802.11b compliant WLAN 
devices can associate with the P-2812HNU-51c only when they use the 
short premble type.

Select 802.11n Only to only allow IEEE 802.11n compliant WLAN 
devices to associate with the P-2812HNU-51c. This can increase 
transmission rates, although IEEE 802.11b or IEEE 802.11g clients will 
not be able to connect to the P-2812HNU-51c.

Select 802.11b/g Mixed to allow either IEEE 802.11b or IEEE 802.11g 
compliant WLAN devices to associate with the P-2812HNU-51c. The P-
2812HNU-51c adjusts the transmission rate automatically according to 
the wireless standard supported by the wireless devices.

Select 802.11 b/g/n mixed mode to allow both IEEE802.11b, 
IEEE802.11g and IEEE802.11n compliant WLAN devices to associate with 
the P-2812HNU-51c. The transmission rate of your P-2812HNU-51c 
might be reduced.

802.11 
Protection

Enabling this feature can help prevent collisions in mixed-mode networks 
(networks with both IEEE 802.11b and IEEE 802.11g traffic).

Select Auto to have the wireless devices transmit data after a RTS/CTS 
handshake. This helps improve IEEE 802.11g performance.

Select Off to disable 802.11 protection. The transmission rate of your P-
2812HNU-51c might be reduced in a mixed-mode network.

This field displays Off and is not configurable when you set 802.11 
Mode to 802.11b Only.

Preamble

Select a preamble type from the drop-down list menu. Choices are Long 
or Short. The default setting is Long. See the appendix for more 
information.

This field is not configurable and the P-2812HNU-51c uses Short when 
you set 802.11 Mode to 802.11g Only or 802.11n Only.

Apply

Click this to save your changes back to the P-2812HNU-51c.

Reset

Click this to reload the previous configuration for this screen.

Table 39   

Wireless LAN > Advanced Setup

LABEL

DESCRIPTION

Summary of Contents for P-2812HNU-51c


















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands