ZyXEL Communications P-2812HNU-51c User Manual Download Page 26

Page: 26 / 433

Chapter 1 Introducing the P-2812HNU-51c

P-2812HNU-51c User’s Guide

None of the LEDs are on if the P-2812HNU-51c is not receiving power.

Table 1

LED Descriptions

LED

COLO
R

STATUS

DESCRIPTION

PWR/SYS

Green

The P-2812HNU-51c is receiving power and ready for
use.

Blinking

The P-2812HNU-51c is self-testing.

Red

The P-2812HNU-51c detected an error while self-testing,
or there is a device malfunction.

Off

The P-2812HNU-51c is not receiving power.

PHONE 1/2 Green

A SIP account is registered for the phone port.

Blinking

A telephone connected to the phone port has its receiver
off of the hook or there is an incoming call.

Orange On

A SIP account is registered for the phone port and there
is a voice message in the corresponding SIP account.

Blinking

A telephone connected to the phone port has its receiver
off of the hook and there is a voice message in the
corresponding SIP account.

Off

The phone port does not have a SIP account registered.

USB

Green

The P-2812HNU-51c recognizes a USB connection.

Blinking

The P-2812HNU-51c is sending/receiving data to /from
the USB device connected to it.

Off

The P-2812HNU-51c does not detect a USB connection.

WAN

Green

The P-2812HNU-51c has an Ethernet connection with a
device on the WAN.

Blinking

The P-2812HNU-51c is sending/receiving data to/from
the WAN.

Off

The P-2812HNU-51c does not have an Ethernet
connection with the WAN.

ETHERNET
1-4

Green

The P-2812HNU-51c has a successful 1000 Mbps
Ethernet connection with a device on the Local Area
Network (LAN).

Blinking The P-2812HNU-51c is sending or receiving data to/from

the LAN at 1000 Mbps.

Orange On

The P-2812HNU-51c has a successful 10/100 Mbps
Ethernet connection with a device on the Local Area
Network (LAN).

Blinking The P-2812HNU-51c is sending or receiving data to/from

the LAN at 10/100 Mbps.

Off

The P-2812HNU-51c does not have an Ethernet
connection with the LAN.

Summary of Contents for P-2812HNU-51c


















































































































































































































































































































































































































































Search results

Summary of Contents for P-2812HNU-51c

Reviews:

Brands by name

Popular brands

ZyXEL Communications P-2812HNU-51c, User Manual

Search results

Summary of Contents for P-2812HNU-51c

Reviews:

Brands by name

Popular brands