ZyXEL Communications MAX-200HW2, User Manual

Page: 56 / 150

Chapter 3 Tutorial
MAX-200HW2 Series User ’ s Guide
58
Figure 22 Tutorial: SIP Account Setup
2 Select SIP1 from the SIP Account list and make sure that the Active SIP Account box
is selected.
3 Enter your SIP user name ( ‘ id123 ’ ) in the
Number
field.
4 Enter your VoIP provider ’ s SIP server name ( ‘ sipserver-abcvoip.com ’ ) in the SIP Server
Address field. As your VoIP provider did not give you a different REGISTER Server
Address
, enter ‘ sipserver-abcvoip.com ’ again.
Enter your VoIP provider ’ s domain name ( ‘ abcvoip.com ’ ) in the SIP Service Domain
field.
5 In the Authentication area, enter ‘ id123 ’ in the
User Name
field, and ‘ zyx987 ’ in the
Password field. Leave the SIP Local Port , SIP Server Port and REGISTER Server
Port fields at their default values, as your VoIP provider did not supply port details.
Click Apply .
6 Click on the Status button in the navigation panel to check that your SIP account is
correctly registered.
Look in the
VoIP Status
area towards the bottom of the
Status
screen. If the
SIP 1
account displays
Registered
in the
Registration
field, it is ready to use.
If the Registration field for the SIP 1 account displays Register Fail or Inactive , click
the
Register
button, check your settings in the
VoIP > SIP
screen or contact your VoIP
provider to confirm that you have the correct settings and that your account is active.
3.4.2 Configure a Phone
Once you have set up your SIP account, click VoIP > Phone > Analog Phone in the
navigation panel. The following screen displays.