ZyXEL Communications MAX-200HW2, User Manual

Page: 142 / 150

Chapter 11 VPN Transport
MAX-200HW2 Series User ’ s Guide
144
Figure 95 Network > VPN Transport > Ethernet Pseudowire
The following table describes the labels in this screen.
11.6 The Ethernet Pseudowire Edit Screen
Use this screen to set up or modify an Ethernet pseudowire ’ s configuration. Click a
pseudowire entry ’ s
Edit
icon in the
Network
>
VPN Transport
>
Ethernet Pseudowire
screen. The following screen displays.
Table 54 Network > VPN Transport > Ethernet Pseudowire
LABEL DESCRIPTION
# This displays the pseudowire index number.
Active This icon is green if the associated pseudowire is enabled. The
icon is grey if the associated pseudowire is disabled. Enable or
disable a pseudowire by clicking its Edit icon.
Ingress This is the MPLS virtual circuit label number for traffic coming
from the peer device.
Egress This is the MPLS virtual circuit label number for traffic going to
the peer device.
Pseudowire Description This displays the information you previously entered describing
the pseudowire.
Modify Click the Edit icon to set up a new interface or alter the
configuration of an existing pseudowire.
Click the
Delete
icon to remove an existing pseudowire.