ZyXEL Communications MAX-200HW2, User Manual

Page: 72 / 150

Chapter 5 VoIP Wizard
MAX-200HW2 Series User ’ s Guide
74
Figure 40 VOIP Wizard: Configuration
The following table describes the labels in this screen
3 The ZyXEL Device attempts to register your SIP account with the SIP server.
Table 16 VOIP Wizard Configuration
LABEL DESCRIPTION
SIP Number Enter your SIP number in this field (use the number or text that comes
before the @ symbol in a SIP account like 1234@VoIP-provider.com ).
You can use up to 127 ASCII characters.
SIP Server Address Type the IP address or domain name of the SIP server in this field. It
doesn ’ t matter whether the SIP server is a proxy, redirect or register
server. You can use up to 95 ASCII characters.
SIP Service Domain Enter the SIP service domain name in this field (the domain name that
comes after the @ symbol in a SIP account like 1234@VoIP-
provider.com ). You can use up to 127 ASCII Extended set characters.
User Name This is the user name for registering this SIP account with the SIP register
server. Type the user name exactly as it was given to you. You can use up
to 95 ASCII characters.
Password Type the password associated with the user name above. You can use up
to 95 ASCII Extended set characters.
Check here to set up
SIP2 settings.
This screen configures SIP account 1. Select the check box if you have
a second SIP account that you want to use. You will need to configure
the same fields for the second SIP account.
Back Click Back to return to the previous screen.
Apply Click Apply to complete the wizard setup and save your configuration.
Exit Click Exit to close the wizard without saving your settings.