Chapter 33 Link Layer Discovery Protocol (LLDP)
GS2210 Series User’s Guide
302
Figure 210
Advanced Applicat ion > LLDP > LLDP Configurat ion> Or g- specific TLV Set t ing
The follow ing t able descr ibes t he labels in t his scr een.
Table 144
Advanced Applicat ion > LLDP > LLDP Configurat ion > Or g- specific TLV Set t ing
LABEL
DESCRIPTION
Port
This display s t he Sw it ch’s por t num ber.
*
Use t his row t o m ake t he set t ing t he sam e for all port s. Use t his r ow fir st and t hen m ake
adj ust m ent s t o each por t if necessar y.
Changes in t his r ow ar e copied t o all t he por t s as soon as you m ake t hem .
Dot 1 TLV
Port - Pr ot ocol
VLAN I D
Select t he check box( es) t o enable or disable t he sending of I EEE 802.1 Por t and Pr ot ocol
VLAN I D TLVs on t he por t ( s) .
Port VLAN I D
Select t he check box( es) t o enable or disable t he sending of I EEE 802.1 Por t VLAN I D
TLVs on t he por t ( s) . All check boxes in t his colum n ar e enabled by default .
Dot 3 TLV
Link
Aggr egat ion
Select t he check box( es) t o enable or disable t he sending of I EEE 802.3 Link Aggr egat ion
TLVs on t he por t ( s) .
MAC/ PHY
Select t he check box( es) t o enable or disable t he sending of I EEE 802.3 MAC/ PHY
Configurat ion/ St at us TLVs on t he por t ( s) . All check boxes in t his colum n ar e enabled by
default .
Max Fram e
Size
Select t he check box( es) t o enable or disable t he sending of I EEE 802.3 Max Fram e Size
TLVs on t he por t ( s) .
