ZyXEL Communications GS1900 Series User Manual Download Page 103

Page: 103 / 263

Chapter 15 Monitor: LLDP

GS1900 Series User’s Guide

103

Each field is described in the following table.

Table 51 Monitor > LLDP > Overloading

LABEL

DESC RIPTIO N

Port Overloading

Port

This label shows the port you are viewing.

Total (Bytes)

This field displays the total in bytes.

Left to Send (Bytes)

This field displays what is left to send in bytes.

Status

This field displays whether the Switch is overloading or not.

Bytes Detail

This field displays how many bytes used by TLVs

Mandatory TLVs

This field displays how many bytes used by mandatory TLVs.

MED Capabilities This field displays how many bytes used by MED capabilities.

MED Location

This field displays how many bytes used by MED location.

MED Network

Policy

This field displays how many bytes used by MED network policy.

MED Extended

Power via MDI

This field displays how many bytes used by MED extended power through MDI.

802.3 TLVs

This field displays how many bytes used by 802.3 TLVs.

Optional TLVs

This field displays how many bytes used by optional TLVs.

MED Inventory

This field displays how many bytes used by MED inventory.

802.1 TLVs

This field displays how many bytes used by 802.1 TLVs.

Summary of Contents for GS1900 Series








































































































































































































































































Search results

Summary of Contents for GS1900 Series

Reviews:

Related manuals for GS1900 Series

Brands by name

Popular brands

ZyXEL Communications GS1900 Series, User Manual

Search results

Summary of Contents for GS1900 Series

Reviews:

Related manuals for GS1900 Series

Brands by name

Popular brands