ZyXEL Communications ES-2108, User Manual, Page: 72 / 284

Chapter 7 Basic Setting
ES-2108 Series User’s Guide
72
Figure 32 Basic Setting > System Info (ES-2108PWR)
Figure 33 Basic Setting > System Info (ES-2108-G)
The following table describes the labels in this screen.
Table 9 Basic Setting > System Info
LABEL DESCRIPTION
System Name This field displays the descriptive name of the Switch for identification purposes.
ZyNOS F/W
Version This field displays the version number of the Switch 's current firmware including the
date created.
Ethernet
Address This field refers to the Ethernet MAC (Media Access Control) address of the Switch.
PoE Status (This section is only available on the PWR model)
Total Power
(W) This is the total power in Watts the PWR model can provide over the Ethernet.
Consuming
Power (W) This field displays the amount of power the Switch is currently supplying to the
connected PoE-enabled devices.
Remaining
Power (W) This field displays the amount of power the Switch can still provide for PoE.
Note: The Switch must have at least 16 W of remaining power in
order to supply power to a PoE device; even if the PoE device
requested for a lower power supply than 16W.