ZyXEL Communications ES-2108, User Manual, Page: 140 / 284

Chapter 19 Multicast
ES-2108 Series User’s Guide
140
19.4 IGMP Snooping VLAN
Click Advanced Application > Multicast > Multicast Setting > IGMP Snooping VLAN
link to display the screen as shown. See Section 19.1.4 on page 138 for more information on
IGMP Snooping VLAN.
Unknown
Multicast Frame Specify the action to perform when the Switch receives an unknown multicast
frame. Select
Drop to discard the frame(s). Select Flooding to send the frame(s)
to all ports.
Port This field displays the port number.
* Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use
this row first to set the common settings and then make adjustments on a port-by-
port basis.
Note: Changes in this row are copied to all the ports as soon as
you make them.
Immed. Leave Select this option to set the Switch to remove this port from the multicast tree
when an IGMP version 2 leave message is received on this port.
Select this option if there is only one host connected to this port.
Group Limited Select this option to limit the number of multicast groups this port is allowed to join.
Max Group Num. Enter the number of multicast groups this port is allowed to join. Once a port is
registered in the specified number of multicast groups, any new IGMP join report
frame(s) is dropped on this port.
IGMP Filtering
Profile Select the name of the IGMP filtering profile to use for this port. Otherwise, select
Default to prohibit the port from joining any multicast group.
IGMP Querier
Mode The Switch treats an IGMP query port as being connected to an IGMP multicast
router (or server). The Switch forwards IGMP join or leave packets to an IGMP
query port.
Select
Auto to have the Switch use the port as an IGMP query port if the port
receives IGMP query packets.
Select
Fixed to have the Switch always use the port as an IGMP query port.
Select this when you connect an IGMP multicast server to the port.
Select
Edge to stop the Switch from using the port as an IGMP query port. The
Switch will not keep any record of an IGMP router being connected to this port.
The Switch does not forward IGMP join or leave packets to this port.
Apply Click Apply to save your changes to the Switch’s run-time memory. The Switch
loses these changes if it is turned off or loses power, so use the Save link on the
top navigation panel to save your changes to the non-volatile memory when you
are done configuring.
Cancel Click Cancel to reset the fields.
Table 43 Advanced Application > Multicast > Multicast Setting (continued)
LABEL DESCRIPTION