ZyXEL Communications ES-2108, User Manual, Page: 64 / 284

Chapter 5 Initial Setup Example
ES-2108 Series User’s Guide
64
Figure 27 Initial Setup Example: Management IP Address
1 Connect your computer to any Ethernet port on the Switch. Make sure your computer is
in the same subnet as the Switch.
2 Open your web browser and enter 192.168.1.1 (the default IP address) in the address bar
to access the web configurator. See
Section 4.2 on page 51 for more information.
3 Click Basic Setting > IP Setup
in the navigation panel.
4 Configure the related fields in the
IP Setup screen.
For the VLAN2 network, enter
192.168.2.1 as the IP address and
255.255.255.0 as the subnet
mask.
5 In the VID field, enter the ID of
the VLAN group to which you
want this management IP address
to belong. This is the same as the
VLAN ID you configure in the
Static VLAN screen.
6 Click Add to save your changes
back to the run-time memory.
Settings in the run-time memory
are lost when the Switch’s power
is turned off.