
Chapter 30 Cluster Management
ES-2108 Series User’s Guide
232
List
A list of suitable candidates found by auto-discovery is shown here. The
switches must be directly connected. Directly connected switches that are set to
be cluster managers will not be visible in the
Clustering Candidate
list.
Switches that are not in the same management VLAN group will not be visible in
the
Clustering Candidate
list.
Password
Each cluster member’s password is its web configurator password. Select a
member in the
Clustering Candidate
list and then enter its web configurator
password. If that switch administrator changes the web configurator password
afterwards, then it cannot be managed from the
Cluster Manager
. Its
Status
is
displayed as
Error
in the
Cluster Management Status
screen and a warning
icon (
) appears in the member summary list below.
If multiple devices have the same password then hold [SHIFT] and click those
switches to select them. Then enter their common web configurator password.
Add
Click
Add
to save your settings to the Switch’s run-time memory. The Switch
loses these changes if it is turned off or loses power, so use the
Save
link on the
top navigation panel to save your changes to the non-volatile memory when you
are done configuring.
Cancel
Click
Cancel
to begin configuring this part of the screen afresh.
Refresh
Click
Refresh
to perform
auto-discovery again to list potential cluster members.
The next summary table shows the information for the clustering members configured.
Index
This is the index number of a cluster member switch.
MacAddr
This is the cluster member switch’s hardware MAC address.
Name
This is the cluster member switch’s
System Name
.
Model
This is the cluster member switch’s model name.
Remove
Select this checkbox and then click the
Remove
button to remove a cluster
member switch from the cluster.
Cancel
Click
Cancel
to begin configuring this part of the screen afresh.
Table 96
Management > Cluster Management > Configuration (continued)
LABEL
DESCRIPTION
Summary of Contents for ES-2108
