ZyXEL Communications ES-2108, User Manual, Page: 40 / 284

Chapter 2 Hardware Installation and Connection
ES-2108 Series User’s Guide
40
2
Drill two holes for the screws (not included). Make sure the distance between the centers
of the holes matches what is listed in the product specifications appendix.
1
Be careful to avoid damaging pipes or cables located inside the wall when
drilling holes for the screws.
3 Do not screw the screws all the way into the wall. Leave a small gap of about 0.5 cm
between the heads of the screws and the wall.
4 Make sure the screws are snugly fastened to the wall. They need to hold the weight of
the Switch with the connection cables.
5 Align the holes on the back of the Switch with the screws on the wall. Hang the Switch
on the screws.
Figure 9 Wall-mounting Example