Data communication
113
Bluetooth function On/Off
Set Bluetooth to On to use Bluetooth function. When you do not use
Bluetooth, set it to Off in order to reduce the battery power
consumption.
・
When it is On,
is displayed on the status bar.
・
Turning the power OFF does not change Bluetooth On/Off setting.
1
From the Home screen,
→
[Settings]
→
[Bluetooth]
2
Tap
/
to set to On (
)/Off (
)
Connecting Bluetooth devices
To connect the terminal and Bluetooth device, pairing is needed.
・
Depending on Bluetooth device, entering passcode (PIN) may be
required for pairing.
・
Bluetooth devices may perform just pairing, or pairing and then
connecting consecutively.
・
Up to 7 Bluetooth devices can be connected at the same time.
Depending on profile, operation may not be correct or number of
devices that can be connected at the same time may be different.
・
Allow a Bluetooth device to be detected in advance.
1
From the Home screen,
→
[Settings]
→
[Bluetooth]
2
Tap
to set to On (
)
3
Tap a detected Bluetooth device
・
If a Bluetooth device you want to connect is not displayed, tap
→
[Refresh].
4
Confirm appeared passcode (PIN)
→
[PAIR]
■
When connection is requested from another
Bluetooth device
If a Bluetooth pair setting request screen appears, confirm a pass
code (PIN) and tap [PAIR].
Sending/Receiving data via Bluetooth
You can send data such as images or contacts, and receive data from
a Bluetooth device.
・
Allow a Bluetooth device to be connected or to be detectable in
advance.
Sending files
1
From the sharing menu of each application,
[Bluetooth]
2
Tap a Bluetooth device
Open the Notification panel to check completion of sending.
Receiving files
1
Sending files from a Bluetooth device
2
After the file incoming notice is received, open
the Notification panel
→
[Incoming file]
→
[ACCEPT]
・
To check the received files, tap [Bluetooth share: Received
files] in the Notification panel, or from the Home screen,
→
[Settings]
→
[Bluetooth]
→
→
Tap [Show received files].