8
DR300-UN
Zeroing or Presetting Axis Position
In either absolute or incremental mode, the current position can be zeroed (setting the origin to the current position) or
preset to any number (offsetting the origin from the current position by the specified distance). The value for each axis is
set independently.
In addition, incremental mode supports the All Axis Zero and Recall Last Value functions.
Abs Set
X: 0 in
8.8.8.8.8.8.8.8.
0.0
.
0
.
0
.
0
.
All Axis Zero
In the incremental mode, to zero all axes at once, press the Ax0 button.
.8.8.8.8.8.8.8.
.8.8.8.8.8.8.8.
0.0
.
0
.
0
.
0
.8.8.8.8.8.8.8.
0.0
.
0
.
0
.
0
0.0
.
0
.
0
.
0
Abs Set
X: 2.5 in
8.8.8.8.8.8.8.8.
2.5
.
0
.
0
.
0
.
Standard Functions
To zero an axis, press the axis button and then, with the axis reading 0.0000, press the OK button.
To offset zero from the current position in an axis, press the axis button and then type in the desired offset
and press the OK button.
