29
Settings
Step
Buttons
Information Screen
1 Press the settings button
Use the right and left arrows to navigate to Scale
Settings and press OK
2 Use the right and left arrows to select the axis to change
settings
Press OK to confirm
3 Use the up and down arrows to select the units for the
selected axis
Press OK to confirm
4 Use the up and down arrows to select the number of
counts per unit for the selected axis
Press OK to confirm
5 Use the up and down arrows to select the direction for
the selected axis
Press OK to confirm
6 Use the up and down arrows to toggle diameter mode
for the selected axis
Press OK to confirm
7 Use the up and down arrows to select the rounding for
the selected axis
Press OK to confirm
8 Use the up and down arrows to toggle between single/
periodic and smart (distance coded) reference
Press OK to confirm
9 Press cancel to exit the settings menu
Press 1 to save changes or 2 to discard
***MAIN MENU***
-Scale Set
SCALE SETTINGS
-Y Axis
OR
Y Axis Cnt/in
0005080
Y Axis Direct
-straight
Y Axis Diam
-Mode is OFF
Y Axis Round
0.0001"/0.001mm
Y Axis Units
-Counts/inch
Save Changes?
1-Yes 2-No
Y Axis Reference
-single/periodic
Encoder Resolution
Counts/in Counts/mm
5.0 um (0.005mm)
5,080
200
1.0 um (0.001mm)
25,400
1000
0.5 um (0.0005mm)
50,800
2000
0.0002”
5,000
N/A
Grating Period/
Resolution/Increment
Period,
Counts
Increment,
Counts
20 um/5.0 um/20 mm
4
4,000
20 um/1.0 um/20 mm
20
20,000
4 um/0.1 um/20 mm
40
200,000
Sample Linear Encoder Settings:
Distance Coded Reference Settings:
To Change the Encoder Settings:
