background image

33

The DR300 series Digital Readouts come with a three (3) years limited warranty and is guaranteed to be free of manufactur-

ing defects in materials and/or workmanship. If the product is found to be defective within a 3 year period from the date of 

original purchase, ZS Instruments will replace or repair the product free of charge. See below for limitations.

All defective products must be first returned to ZS Instruments and pass an inspection process for a warranty claim to be 

approved. ZS Instruments, under its sole discretion, will repair, replace or refund the cost of the defective products. Defects 

caused by normal wear and tear, improper installation, use for not intended purpose and/or abuse are not covered. War-

ranty is void if any part of the product was physically damaged, submersed in liquids, subjected to electrostatic discharge 

or electromagnetic pulse, altered by any way, disassembled, or repaired by unauthorized personnel.

This warranty does not apply to installation and shipping costs. Any expenses occurred as a result of ZS Instruments prod-

uct failure including but not limited to product installation and defective output are the sole responsibility of the purchaser.

ZS Instruments makes no warranty, express or implied, as to merchantability or fitness for a particular purpose. ZS Instru-

ments shall not be liable for any direct, indirect, punitive, incidental or consequential injury, loss, or damage, including but 

not limited to lost data, lost savings, production downtime, cancellation of contracts, lost profits, or lost business opportu-

nity arising from the use of ZS Instruments products.

This warranty applies only to the DR300 series of digital readouts. Warranty terms for other categories of products and 

other models of digital readout may vary.

The liability of ZS Instruments under this warranty may not exceed the original purchase price of the product, regardless of 

legal theory applied, including but not limited to, contract, warranty, negligence, or strict liability.

ZS Instruments products are not authorized for use in critical applications. Critical applications defined herein as systems 

in which the failure of a single component could cause a life loss or substantial property damage (life support systems, nu-

clear, military etc). If you intend to use our products in such applications, you must first obtain a written authorization and 

have a written agreement with ZS Instruments regarding such a use.

Three-Year Limited Warranty

If you have any questions related to ZS Instruments Products, Installation, Warranties, or Returns, please contact us by 

using one of the methods listed in this manual or on our website: 

www.zsinstruments.com

The information contained in this document is subject to change without prior notice. In no event  ZS Instruments shall be held respon-

sible for any errors and omissions in this document. We reserve the right to make modifications and improvements to our products at 

any time.

© 2018, ZS Systems LLC. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, or translated into 

any language without prior written permission from ZS Systems LLC.

Summary of Contents for DR300UN



































Reviews: