![background image](http://html2.mh-extra.com/html/zoll/propaq-md/propaq-md_service-manual_3990958046.webp)
C
HAPTER
1
M
AINTENANCE
T
ESTS
40
9650-0807-01 Rev. C
21.0 NIBP Leak Test
Equipment
Dual lumen NIBP hose, stop watch, NIBP simulator
Do This...
Observe This...
Pass/Fail
21.1 Turn on the Propaq unit.
Note
: If the unit is in AED mode, press
the
Manual
quick access key to go into
manual mode.
21.2 Connect a dual lumen hose from the NIBP
simulator to the NIBP port of the Propaq.
21.3 On the Propaq unit, do the following to
enter the NIBP Test control panel:
•
Press the More
(
) then the Setup
(
) quick access keys.
•
Use the navigation keys to select
Supervisor
>
Service
>
Device
Tests
>
NIBP Test
.
Note
: You need a supervisor passcode to
enter the Supervisor menu.
21.4 From the Propaq NIBP Test control panel,
use the navigation keys to select:
•
Close Valve
•
Turn Pump On
21.5 Monitor the pressure reported by the
external pressure standard.
21.6 Once the pressure reaches the target
pressure of 250 +/- 5 mmHg, use the
navigation keys to select
Turn Pump Off
.
21.7 Allow the system to stabilize for at least
10 seconds.
21.8 Select
Mark P1
to mark the starting
pressure. Wait 15 seconds, then select
Mark P2
.
21.9 From the NIBP Test control panel, select
Open Valve
to release the pressure.
21.10 Calculate the leak rate: L = P1 - P2.
Reading should be=<5 mmHg.
o
o
21.11 From the NIBP Test control panel, select
Clear
.
Summary of Contents for Propaq MD
