![background image](http://html2.mh-extra.com/html/zoll/propaq-md/propaq-md_service-manual_3990958025.webp)
Maintenance Tests
9650-0807-01 Rev. C
ZOLL Propaq MD Service Manual
19
6.0 Power Supply Test
Equipment
Battery Current Test Fixture (P/N 9100-3055-TF), Power Supply, Digital Multi-meter.
Test Setup
1. Set the Power Supply to 12V VDC
2.
Turn off the Power Supply output.
3.
Connect the positive (PS+) post of the Power Supply to the positive (PS+) post (PS Red) of
the Battery Current Test Fixture.
4.
Connect the negative (PS-) post of the Power Supply to the negative (PS-) post (PS Black) of
the Battery Current Test Fixture.
5.
With the Battery Current Test Fixture out of the battery well, turn on the Power Supply
output.
6.
Wait 5 seconds, then press the charge capacity switch on the Battery Current test fixture and
verify that the green LEDs momentarily turn on.
7.
Set the Digital Multi-meter to measure
DC I
DC Amps.
8.
Set the rear/front switch on the Digital Multi-meter to rear.
9.
Connect the Digital Multi-meter (I+) terminal of the Battery Current Test Fixture to the red
terminal (I) on the back of the Digital Multi-meter.
10.
Connect Digital Multi-meter (I-) terminal of the Battery Current Test Fixture to the black
terminal (LO) on the back of the Digital Multi-meter.
Do this...
Observe this...
Pass/Fail
6.1
Install the Battery Current Test
Fixture into battery well and wait
about five seconds.
6.2
Make sure the Propaq unit is turned
off.
Ensure that paper is loaded in the
printer and the printer door is
closed.
6.3 Press
the
I Measure
switch on the
Battery Current Test Fixture.
Verify that the reading on the digital
multi-meter is between
0.583mA-0.770mA.
o
o
6.4
Turn on the Propaq unit, and wait
about ten seconds until the power
has stabilized.
Summary of Contents for Propaq MD
