Maintenance Tests
9650-0807-01 Rev. C
ZOLL Propaq MD Service Manual
23
8.14 On the Propaq unit, press the
Shock
button.
8.15 On the Analyzer, observe and record the
energy measurement.
Energy is delivered at 50J. Verify
that the delivered energy is within
15% based on the impedance
values of your analyzer in the
table “Delivered Energy at 200J
Defibrillator Setting into a Range
of Loads” on page 24.
o
o
8.16 On the Propaq unit, set energy level to 100J
by pressing the Energy Select UP arrow.
8.17 On the Propaq unit, press the
CHARGE
button.
The unit charges to 100J, the
Shock button illuminates and a
ready tone sounds.
o
o
8.18 On the Propaq unit, press the
Shock
button.
8.19 On the Analyzer, observe and record the
energy measurement.
Energy is delivered at 100J.
Verify that the delivered energy is
within 15% based on the
impedance values of your
analyzer in the table “Delivered
Energy at 200J Defibrillator
Setting into a Range of Loads” on
page 24.
o
o
8.20 On the Propaq unit, set energy level to 200J
by pressing the Energy Select UP arrow.
8.21 On the Propaq unit, press the
CHARGE
button.
The unit charges to 200J, the red
Shock button illuminates and a
ready tone sounds.
o
o
8.22 On the Propaq unit, press the
Shock
button.
8.23 On the Analyzer, observe and record the
energy measurement.
Energy is delivered at 200J.
Verify that the delivered energy is
within 15% based on the
impedance values of your
analyzer in the table “Delivered
Energy at 200J Defibrillator
Setting into a Range of Loads” on
page 24.
o
o
8.24 On the Propaq unit, press the
CHARGE
button.
The unit charges to 200J, the red
Shock button illuminates, and a
ready tone sounds.
o
o
8.25 When the Propaq unit is charged, start the
stop watch.
Verify that after 50 seconds the
tone changes and within 10
seconds the unit does an internal
discharge and displays
DISARMED TIMEOUT
.
o
o
Do This...
Observe This...
Pass/Fail
Summary of Contents for Propaq MD
