Zodiac AquaLink PDA P4, Owner'S Manual

Page: 29 / 132

Page 29
ENGLISH
AquaLink
®
PDA | Installation and Operation Manual
6.9 Assign JVA Menu
The ASSIGN JVAs menu allows Jandy Valve
®
Actuators (JVAs) to be assigned to any auxiliary button. This means
that whenever you press that auxiliary button, a valve turns. On pool/spa combination models, if neither a non-booster
pump pool cleaner or a solar heat system is installed, there are two extra JVAs that can be assigned to auxiliary
buttons: the cleaner JVA and the solar JVA. On pool/spa only models, there are four JVAs that can be assigned to
auxiliary buttons. The installer must set these JVAs for this feature to operate correctly. Assigning JVAs lets the owner
control certain features like diverting water to a waterfall or bank of spa jets. Multiple JVAs can be assigned to one
auxiliary button without extra hardware.
6.9.1 To set Assign JVAs
Highlight MENU and press SELECT, highlight SYSTEM SETUP and press SELECT, highlight ASSIGN JVAs and
press SELECT. Highlight the JVA you wish to use and press SELECT. Use the UP/DOWN arrow keys to move the
highlight bar to the auxiliary button you want to assign, press SELECT to assign the JVA.
ASSIGN JVAs
INTAKE USED
RETURN USED
CLEANER FREE
SOLAR USED
MAIN MENU
HELP
PROGRAM
SET TEMP
SET TIME
PDA OPTIONS
SYSTEM SETUP
SYSTEM SETUP
LABEL AUX
FREEZE PROTECT
AIR TEMP
DEGREES C/F
TEMP CALIBRATE
SOLAR PRIORITY
PUMP LOCKOUT
ASSIGN JVAs
MORE
ASSIGN
CLEANER JVA
NO ASSIGNMENT
AUX1
AUX2
AUX3
AUX4
AUX5
AUX6
6.10 Set Color Lights Menu
NOTE
This equipment may not be part of your system. Please check with your installer.
The COLOR LIGHTS menu is used to select the color light type (Jandy
®
Colors, Jandy LED Light, SAm
®
/SAL
®
or
Color Logic
®
), and to assign the color light to an available auxiliary relay.
NOTE
You must also label the auxiliary pool or spa light.
6.10.1 To set Color Lights
Highlight MENU and press SELECT, highlight SYSTEM SETUP and press SELECT, highlight COLOR LIGHTS
and press SELECT. Use the UP/DOWN arrow keys to highlight the light type to be controlled and then press
SELECT. A list of available auxiliaries will be displayed.
Use the UP/DOWN arrow keys to highlight an auxiliary to be assigned to a color light, then press SELECT. “JC” will
appear next to the AUX if a Jandy Colors has been assigned. “JL” will appear next to the AUX if a Jandy LED Light
has been assigned."SL" will appear next to the AUX if a SAm/SAL Light has been assigned. "CL" will appear next
to the AUX if a COLOR LOGIC Light has been assigned. If the SELECT button is pressed again, while on the same
selected item, the “JC”, "JL", "SL", or "CL" will disappear meaning that a color light is no longer being controlled by
the auxiliary. Use the BACK button when finished.
SELECT COLORED
LIGHT TYPE
JANDY COLORS
JANDY LED LIGHT
SAM/SAL LIGHT
COLORLOGIC LIGHT
Use ARROW KEYS
to set value.
MAIN MENU
HELP
PROGRAM
SET TEMP
SET TIME
PDA OPTIONS
SYSTEM SETUP
SYSTEM SETUP
FREEZE PROTECT
AIR TEMP
DEGREES C/F
TEMP CALIBRATE
SOLAR PRIORITY
PUMP LOCKOUT
ASSIGN JVAs
COLOR LIGHTS
MORE
ASSIGN COLORED
LIGHT TO AUX
AUX1 JC
AUX2
AUX3
AUX4
AUX5
AUX6
AUX7