Zodiac AquaLink PDA P4, Owner'S Manual

Page: 28 / 132

Page 28
ENGLISH
AquaLink
®
PDA | Installation and Operation Manual
6.7 Solar Priority
The Solar Priority menu allows the system to use Solar Heat primarily. If Solar Heat is no longer available, the system
will automatically switch to the alternate heat source.
6.7.1 To use the Solar Priority menu
Highlight MENU and press SELECT, highlight SYSTEM SETUP and press SELECT, highlight SOLAR PRIORITY
and press SELECT. Use the UP/DOWN arrow keys to highlight desired setting and press SELECT.
When solar and heater are enabled the solar will heat the water until either the thermostat setting has been reached or
solar heat is no longer available. If the solar panel is not hot enough, solar heat will shut off and the other heat source
(usually gas heater) will take over to bring the water up to the thermostat setting. This menu is used to ENABLE or
DISABLE the solar priority.
6.8 Pump Lockout Menu
The PUMP LOCKOUT menu allows you to enable (pump off) or disable (pump stays on) when valves are rotating
from pool to spa.
6.8.1 To set Pump lockout
Highlight MENU and press SELECT, highlight SYSTEM SETUP and press SELECT, highlight PUMP LOCKOUT
and press SELECT. Use the UP/DOWN arrow keys to highlight ENABLED or DISABLED and press SELECT.
MAIN MENU
HELP
PROGRAM
SET TEMP
SET TIME
PDA OPTIONS
SYSTEM SETUP
SYSTEM SETUP
LABEL AUX
FREEZE PROTECT
AIR TEMP
DEGREES C/F
TEMP CALIBRATE
SOLAR PRIORITY
PUMP LOCKOUT
ASSIGN JVAs
MORE
SOLAR HEAT PRIOR
ENABLED
DISABLED
Choose setting
and press SELECT.
MAIN MENU
HELP
PROGRAM
SET TEMP
SET TIME
PDA OPTIONS
SYSTEM SETUP
SYSTEM SETUP
LABEL AUX
FREEZE PROTECT
AIR TEMP
DEGREES C/F
TEMP CALIBRATE
SOLAR PRIORITY
PUMP LOCKOUT
ASSIGN JVAs
MORE
PUMP LOCKOUT
DURING
VALVE SWITCHING
ENABLED
DISABLED
Choose setting
and press SELECT.