Zodiac AquaLink PDA P4, Owner'S Manual

Page: 13 / 132

Page 13
ENGLISH
AquaLink
®
PDA | Installation and Operation Manual
Important Information
Do not activate this feature unless you are certain that color lights are installed on your system
EQUIPMENT
FILTER PUMP
SPA
POOL HEAT
SPA HEAT
SOLAR HEAT
POOL LIGHT
AUX 2
AUX 3
MORE
ON
OFF
OFF
OFF
OFF
ON
OFF
OFF
LIGHT
WILL TURN OFF
IN 5 SECONDS. IF
YOU WANT TO
CHANGE THE
COLOR PRESS
SELECT NOW.
PLEASE
WAIT . . .
CYCLING TO
CHOSEN COLOR
SET COLOR
ALPINE WHITE
SKY BLUE
COBALT BLUE
CARIBBEAN BLU
SPRING GREEN
EMERALD GREEN
EMERALD ROSE
MAGENTA
MORE
3.9 Set Light Colors
NOTE
This equipment may not be part of your system. Please check with your installer.
The SET COLOR menu is used to set the color of a color light and then turn the light on.
NOTE
Prior to setting the color of the light, the light must be assigned and controlled by an auxiliary (for example, AUX 1). See
"Using System Setup" to assign the light to an auxiliary control. Please note that the auxiliary control can be custom
labeled.
3.9.1 To use Set Colors
Highlight EQUIPMENT ON/OFF and press SELECT. Highlight the auxiliary assigned to the color light and press
SELECT. A list of available colors will be displayed. The most recently selected color will be highlighted. Use the
UP/DOWN arrow keys to highlight the desired color and press SELECT.
EQUIPMENT
FILTER PUMP
SPA
POOL HEAT
SPA HEAT
SOLAR HEAT
POOL LIGHT
AUX 2
AUX 3
MORE
ON
OFF
OFF
OFF
OFF
OFF
OFF
OFF
EQUIPMENT
FILTER PUMP
SPA
POOL HEAT
SPA HEAT
SOLAR HEAT
POOL LIGHT
AUX 2
AUX 3
MORE
ON
OFF
OFF
OFF
OFF
ON
OFF
OFF
PLEASE
WAIT . . .
CYCLING TO
CHOSEN COLOR
SET COLOR
ALPINE WHITE
SKY BLUE
COBALT BLUE
CARIBBEAN BLU
SPRING GREEN
EMERALD GREEN
EMERALD ROSE
MAGENTA
MORE
NOTE
If you select POOL LIGHT or SPA LIGHT from the EQUIPMENT ON/OFF menu and the light is already ON, pressing
SELECT will display the message "LIGHT WILL TURN OFF IN 5 SECONDS. IF YOU WANT TO CHANGE THE COLOR
PRESS SELECT NOW”. If you press SELECT, the SET COLOR menu will open and allow you to select a different color. If
a different color is chosen, the light will reset to Alpine White, rotate to the selected color, and then automatically lock on to
that color. During the color rotation, the message “PLEASE WAIT…CYCLING TO CHOSEN COLOR” will be displayed.
When a pool or spa light is turned ON manually, by the PDA Handheld Remote panel, or by a program, the last used color
will automatically be chosen unless you press SELECT to change the color.
If you press the BACK key when in the EQUIPMENT ON/OFF menu, the light will turn on the last selected color. If
the SELECT key or the BACK key is not pressed, and if it has been 15 seconds since the UP/DOWN keys have been
pressed, then the most recently selected color will be selected again.